Floor Drill Press Stand Table for Drill Workbench Repair Tool Clamp HFS

[Product Specifications]:

• Product size: 40 cm high × 15.5 cm wide × 15.5 cm thick;
• Adjustable angle: 0°~90°, use this drill stand to drill oblique holes;
• Material: Aluminum die-casting;
• Sliding type: Up and down sliding type;
• Maximum working stroke: 60mm;
• Base equipped with 4 screws.

[Professional Design]: This heavy-duty drill stand is specially designed for electric drills with a diameter of 38mm to 43mm (1.48 inches to 1.7 inches). With this drill stand, you can drill holes on surfaces, round workpieces and plates with absolute precision.

[Bottom Bracket]: It has a sturdy column, a slot for installing a vise on the base, and 4 clamping points for firmly fixing it on the workbench. It also has a depth adjustment scale and an adjustable scale ring. You can set the drilling depth precisely up to the last millimeter.

[Precautions for use]:
In order to prevent the drill bit from slipping, make a dent with a center punch where you want to drill the hole. If the drill is not firmly fixed, it may wobble during operation. If the drill stand and the material are not secured, they may cause serious injury by the blade, so please wear gloves and goggles before starting work.
If you want to drill a hole with a hand-held electric drill, it may be difficult to make a vertical hole, even if you are careful not to bump or shake the drill.
The material may also affect the accuracy of the hole, especially if it is wood, which has hard and soft parts. If you are drilling a pilot hole for a screw, it may not matter much, but if you need a precise vertical hole, you may want to use this drill stand.